JMB321    
1 to 5-ports Serial ATA II Port Multiplier or a 5 to 1-port Serial ATA II Port Selector

product brief

Overview
    JMicron JMB321 is a single chip. It integrated six independent SATA channels and a micro-processor. With proper setting, the chip can be configured as an 1 to 5-ports Serial ATA II Port Multiplier or a 5 to 1-port Serial ATA II Port Selector.
    JMB321 contains 15 GPIOs which can be configured as various standard interfaces. It also has the capability to load external firmware code to extend its functionality.

 

Feature
Compliance
.Compliant with Serial ATA II Port Multiplier Spec. Revision 1.2
.Compliant with Serial ATA II Port Selector Spec. Revision 1.0
.Compliant with Serial ATA II PHY Electrical Spec. Revision 1.0
.Compliant with Serial ATA High Speed Serialized AT Attachment Spec. Revision 2.5

 

General
.Integrated 6-port SATA II PHY
.Integrated PLL for SATA II interface
.Total six independent SATA channel
.Integrated uP, PROM and SRAM for firmware programming
.Fabricated in 0.13um CMOS Standard Logic Process
.1.3V core and 3.3V I/O power supply
.Available in 64-pin QFN

 

SATA
.Supports 6-port 3.0Gbps SATA II interface
.Supports SATA II Gen2i and Gen2m (External SATA Connection, eSATA)
.Output swing control and automatic impedance calibration for SATA II PHY
.Supports asynchronous signal recovery
.Supports spread spectrum clocking
.Supports partial / slumber power saving mode
.Automatically speed negotiation for 3 Gbps or 1.5 Gbps
.Supports BIST and loopback mode
.Supports staggered spin-up
.Supports 48-bit LBA addressing
.Supports ATAPI drives
.Supports Native Command Queue (NCQ)
.Supports Hot-Plug
.Supports Asynchronous Notification
.Supports PM aware and non-PM aware host

 

GPIO
.Supports 15 GPIOs
.Supports I2C interface
.Supports ISA interface
.Supports SPI interface
.Supports firmware extension

 

© Copyright 2006 - JMicron Technology Corporation- All Rights Reserved.